Heat Pump Problems During Winter Months

Heat Pump Problems During Winter Months
Heat Pump Problems During Winter Months
With winter in full swing, it’s time to think about how to keep your heat pump running smoothly. Winter can be a tough time for the system and make it difficult to keep you warm and comfortable at home. The cold and the snow can wreak havoc on your system. So, your heat pump seems to be struggling during the winter months. What’s going on? Why is it having so much trouble now, when it seemed to work just fine during the summer? It might sound counter-intuitive, but this is all because of something that happens as a result of cold temperatures: Ice.

Common Heat Pump Problems During Cold Weather

Covered in Ice

In cold weather, it’s common for the coils of a heat pump to become covered in ice. This usually happens because the liquid refrigerant flowing through the system is freezing as it flows over the coils. This may sound counter-intuitive, but this is actually a natural occurrence that can be explained with a little science: When air cools down, it becomes more difficult for molecules to move around – including those that make up liquid refrigerants. When liquid refrigerants start to freeze, they expel heat energy and become lighter – just like regular water does when it freezes into ice cubes. The resulting pressure drop across the now-frozen liquid refrigerant causes the remaining fluid (and all of its heat) to evaporate quickly. Since the heat pump is supposed to pull just enough heat from the outside air and transfer that into your home, it also pulls this heat away from the now-light refrigerant. Sometimes this causes a significant drop in pressure – low enough that the coils of your heat pump start to freeze over.  


When this happens, the heat pump can’t work properly. The refrigerant can’t transfer heat any more. So it’s frozen on the coil and the system stops working all together.  If this is the case you may want to look into heat pump repair services to help assist.  

Draining Problems

One of the main problems with the heat pump is that sometimes, if it starts to freeze during winter, it can cause the system to shut down entirely. When this happens, the system will not function at all. This means that the liquid refrigerant is no longer flowing through the coils of your heat pump and there’s nothing moving any more. If this isn’t treated quickly, the result can be an expensive repair bill for your heat pump. A few ways to avoid this are making sure any drainage plugs are removed when not in use, using a gas heater or electric heater as a backup when using your heat pump in the winter, and keeping all vents throughout your home clear of furniture or other obstructions.

Blocked Coils

Some other things to look out for in cold weather are blocked coils. Blocked coils can happen in the winter when the heat pump’s refrigerant starts to freeze. The result is a frozen coil that can’t function properly, which will cause your system to shut down. One way for this to happen is if you have a vent on your home – especially one facing an area where it might be colder outside – and there’s some kind of obstruction over it. Or maybe even a bird’s nest or plants that have started growing up into it. Any obstruction can really interfere with the airflow of your heat pump, causing the ice build-up during winter months.  If this is the case you may want to look into getting a new heat pump installed if in fact it is damaged.

Weather Elements

Heat pumps work best in hot weather when the outside air is warm. If the temperature outside is too low, however, your heat pump will not be able to work properly. This is because the coils on your heat pump are made of metal and they need help to stay warm enough for them to transfer heat to or from an area. When the outside temperature dips below 45 degrees Fahrenheit, it becomes difficult for the refrigerant in a normal heat pump to flow through the copper coils. The refrigerant starts freezing within the tubes that make up the coils of your heat pump system, and this reduces its ability to transfer heat. The result of this is that cold air comes into your home and then cold air goes back out into the environment. This can be a huge waste of energy – as much as 30 to 50 percent of your total heating and cooling costs! – and it can also damage your heat pump over time.

Time for Replacement

Depending on how old your heat pump is, it may need to be replaced every 10-12 years or so. Heat pumps can make you feel comfortable during the cold winter months, but the intense winter cold can lead to ice build-up and blockages. There are several things you can do to help reduce the risk of this happening like keeping vents clear, using a backup heating system, and having your HVAC technician perform heat pump maintenance.   Winter can be a tough time for your heat pump. The cold and the snow can wreak havoc on your system and make it difficult to keep you warm and comfortable at home. Fortunately, there are several things you can do to help reduce the risk of this happening like keeping vents clear, using a backup heating system, and having your heat pump checked by an HVAC technician. If all these steps seem overwhelming or if you want expert assistance with your heat pump issues contact us today!

Heat Pumps: How They Work and Why You Should Use Them?

Heat Pumps- How They Work And Why You Should Use Them
Heat Pumps- How They Work And Why You Should Use Them
A heat pump is the most efficient type of heating system available. Unlike other types of systems, it takes advantage of energy from both its interior and exterior sources. Air conditioners are also an excellent way to cool your home in the summertime. Heat pumps work by transferring heat from one area to another. It converts the outside air into hot air, which is then distributed into your home for heating purposes. This system is clean and efficient, using less energy than any other type of heating system.

What is a Heat Pump?

A heat pump is a device that transfers heat from one area to another. It can be used to heat or cool a home, depending on the season. Heat pumps are more efficient than other types of heating systems, and they use less energy overall. The heat pump has an operating temperature of about 50° Fahrenheit, but the coils are located outside. When used for cooling, it takes in heat from inside your home and transfers it to the outside air. A typical heat pump system includes a number of components, including the compressor, condenser, evaporator, and expansion valve. The compressor is located outside, and it pumps refrigerant from the condenser to the evaporator. The refrigerant passes through the expansion valve, which controls the amount of refrigerant that enters the evaporator. The evaporator is located inside your home, and it absorbs heat from the air. This heat is then transferred to the refrigerant, which is pumped back to the compressor. The process repeats itself, transferring heat from your home to the outside air.

How Does a Heat Pump Work?

A heat pump transfers heat from one area to another. It takes in heat from inside your home and transfers it to the outside air. A heat pump is an air conditioner that can also provide heat. During the summer, it pulls heat from your home and releases it outside. During the winter, it does the opposite, pulling heat from the outside air and releasing it into your home. A heat pump is a much more efficient way to heat your home than using traditional heating systems like furnaces. Instead of burning fuel, a heat pump absorbs the heat from one area, converts it into energy, and sends that energy to another area. This process is incredibly efficient because the outside air doesn’t need to be very hot for your home to be comfortable. In fact, most homes are more than warm enough with just a few degrees of temperature change. The heat pump also allows you to use less energy, which can save you a lot of money in the long run.

How Does a Heat Pump Save Energy?

The heat pump makes use of something known as “the Coanda Effect” to accomplish this task. The Coanda Effect is named after Henri Coanda, who pioneered this principle in 1910. It is the force that causes air to flow over an object and changes its direction. This principle allows your home’s temperature to be regulated more efficiently than with ordinary cooling principles because it doesn’t have to cool its own coils in order to keep them at room temperature. It takes advantage of the surrounding air. Heat pumps are more efficient than other types of heating systems because they make use of this principle to extract heat from the environment outside your house or building. They also make use of a reversed cycle, which makes it possible to extract additional heat energy without expending additional pounds of coal or natural gas . The result is lower heating bills for you and a smaller carbon footprint for the environment.

What to Look for in a Heat Pump?

When shopping for heat pump installation, there are a few things you’ll want to keep in mind. Here are some of the most important factors to consider:
  1. Size: The heat pump you choose should be the right size for your home. It’s important to have a unit that’s powerful enough to heat your entire house, but not so powerful that it’s oversized and ends up costing you more money to operate.
  2. Efficiency: Heat pumps are one of the most efficient types of heating systems available. Look for a model with an Energy Star rating to ensure you’re getting the most bang for your buck.
  3. Brand: Not all heat pumps are created equal. When shopping for a heat pump, be sure to choose a reputable brand with a good reputation.
  4. Installation: It’s important to have a qualified installer install your heat pump. An improperly installed unit can be less efficient and may not work properly.
Heat pumps are an excellent choice for heating your home. They’re efficient, reliable, and cost-effective.  

Benefits of Heat Pumps

There are many benefits to using a heat pump to heat your home. Some of the most important benefits include:


Heat pumps are one of the most efficient types of heating systems available. They use less energy than traditional heating systems, which can save you money in the long run.


Heat pumps are an affordable way to heat your home. They’re less expensive to operate than traditional heating systems, and they may also qualify for tax credits or rebates.


Heat pumps are reliable and durable. They last longer than traditional heating systems, and they require less maintenance.


Heat pumps don’t produce harmful emissions like traditional heating systems do. They’re clean and environmentally-friendly, which makes them a good choice for homes with green sensibilities.


Heat pumps can be used to heat your home or your water. This makes them a versatile option that can meet your needs year-round.

Types of Heat Pumps

There are three types of heat pumps: air-to-air, ground water, and geothermal. The type you choose will depend on the building’s geographical location.

Ground Water Heat Pump

Ground water heat pump systems use a loop of pipes buried in the ground to draw heat from the earth. As the heat rises during the winter, it is compressed by a series of compressors and cooled before entering your home. This system is most effective when your home is near a deep well with high quality groundwater that flows year round.

Air-to Air Heat Pump

This type of system draws outside air over a set of coils called an evaporator core to transfer heat from outdoors into your home. In order for this type of system to work, your home must be located in a place that has mild winters and hot summers.

Geothermal Heat Pump

These types of heat pumps use the surrounding earth as its core source for heating and cooling your home. This type of system is most effective when your home is located on or near a large body of water such as a lake, ocean, or river.

What’s the Difference Between an AC and a Heat Pump?

An air conditioner (AC) is a unit that cools the air in your home by extracting heat from the indoor air and releasing it outdoors. A heat pump is a unit that heats your home by extracting heat from the outdoor air and releasing it indoors. The main difference between an AC and a heat pump is that an AC only cools your home, while a heat pump can also be used to heat your home. Additionally, a heat pump is more efficient than an AC, and it can save you money on your energy bills.

Does a Heat Pump Cool as Well as an Air Conditioner?

A heat pump can cool your home the same way as an air conditioner by extracting heat from the inside of your house and releasing it outdoors. A heat pump is much more efficient than an air conditioner, and can save you a lot of money on your energy bills.   Heat pumps are a great choice for heating your home. They’re efficient, reliable, and cost-effective. Heat pumps can be used to heat water as well which makes them versatile year round! If you haven’t considered installing one yet, we recommend talking with an expert at our company so they can help you decide if it’s the right decision for you and your family. We also offer free consultations where we’ll walk through all of the different features and benefits that come with using these heating services in your home or business. Let us know how we can help!

What To Do When Your Furnace Is Blowing Cold Air?

What To Do When Your Furnace Is Blowing Cold Air?
What To Do When Your Furnace Is Blowing Cold Air?
Every winter, when the furnace is blowing cold air instead of hot heat, it’s a homeowner’s worst nightmare. But before you panic, there are a few things you can do to identify why your furnace isn’t working properly.

Be sure your furnace has warmed up

One of the first things you’ll want to do is ensure that your furnace has had time to warm up. Depending on the type of furnace, it can take anywhere from ten minutes to one hour for it to reach full heat. This is why many furnaces have a “delay start” or “hold-in heat” feature, which draws energy even when off so your heating system stays pre-heated until you need it. Fortunately, there are a few simple ways to tell if your furnace has warmed up, namely by inspecting the air coming out of the vents. If it’s still cold, double check the touch controls on your thermostat that might be set too low or bypassed altogether. Another common reason why furnaces blow cold air is clogs. It’s important to check the vents for blockages before working on any other issues, because a heater that blows dust and debris can’t work properly.

Check thermostat settings

If your furnace is still blowing cold air, the first thing you’ll want to do is be sure that your thermostat is set to the right temperature. This will be especially true if you just finished installing a new furnace. It’s common for furnaces to send out very cold air at first, but they should warm up within an hour or so. If this doesn’t happen, there may be something wrong with the thermostat. To access the thermostat settings on an analog thermostat, locate them under the red cover, typically located near one of the vents. To access the settings on a digital thermostat, it should either be listed under “Settings” or “Thermostats.” If your thermostat is giving you an error message, check the manual to know what this means. Once you identify why your furnace has stopped blowing hot air, it may be easy for you to figure out how to fix the problem! For example, say your furnace still blows cold air despite being set at 90 degrees Fahrenheit. This could mean there are problems with the thermostat, either because it’s broken or not connected properly. If it’s connected and working correctly but still emits cold air, this could be an issue with your furnace itself. If there are problems with your furnace, you may need to call in a professional once you’ve identified why it’s blowing cold air. Furnaces are complicated, and while many homeowners can do repairs themselves, it’s always advised that you call a professional when things get serious.

Check the air filter

One thing to check is the filter. If the filter needs to be changed or cleaned, this might be the culprit for your furnace not warming up. If you have a multi-stage furnace, this filter might be located on the outside of your furnace. If it’s an oil burner, this is typically inside the barrel. For any furnace type, look for an intake or grill that’s recessed into the wall of your home. This will be where the filter is located, and you can simply wipe it clean or replace it. If this doesn’t fix the issue, try replacing the filter with a new one.

Check the pilot light (for a gas furnace)

One thing to check when your furnace is blowing cold air is the pilot light. For a gas furnace, the pilot light must be turned on for the heat to work properly. If you have any doubts about whether or not your pilot light is on, try turning it off and on again. If the furnace starts heating properly when you turn it back on, you know it was probably just off. If this doesn’t solve the problem, try calling in a professional to make sure nothing else has gone wrong with your gas furnace!

Reset your system (electric furnace)

Electric furnaces, while slightly more complicated to work with, are fairly easy to fix. If your furnace is still blowing cold air, the first thing you’ll want to do is reset the heating system. This will be especially true if you just finished installing a new furnace. A common cause of furnaces blowing cold air at first is their systems being reset incorrectly during installation, and this may simply need a quick fix!

Check your ductwork 

One thing to do when your furnace is blowing cold air is check your ductwork. It’s a common mistake during installation for furnaces to send out very cold air at first, but they should warm up within an hour or so. If this doesn’t happen, it may be due to a problem with the ductwork. To access the intake vents for the ducts where the furnace connects, follow the metal pipe outside. This will usually lead to a filter that you can clean or replace if needed. If this doesn’t fix the issue, try replacing the filter with a new one. If this doesn’t solve the problem, you may need to call in a professional for help! It’s always advised that homeowners hire professionals when dealing with heating and cooling issues. You don’t want to risk breaking something or accidentally making the issue worse.   If you’re experiencing cold air blowing from your furnace despite it being set at the right temperature, there are a few things that could be the culprit. Did you change or clean your filter? Is the pilot light on for your gas furnace and if so is it off and then back on again to reset the system? For electric furnaces, has anything been recently installed incorrectly or is there an error message coming up when trying to turn the heat on? If these simple fixes don’t solve this problem, we recommend calling in a professional as soon as possible! It’s always advised that homeowners hire professionals when dealing with heating and cooling issues. You don’t want to risk breaking something or accidentally making the issue worse.  Give us a call today and we’d be happy to help!

7 Quick Tips for Preparing Your HVAC System For Winter


Homes are getting bigger. More people are moving into the suburbs. And more homes are being built in areas where winters can be very cold. That means that HVAC systems have to work harder than ever before to keep up with all of these demands, especially during the winter months when temperatures drop and heating demand spikes. Fortunately, there are a few things you can do to prepare your system for winter so that it will work better and last longer-and stay comfortable inside your home all year long!

Schedule an HVAC Maintenance Appointment

During the fall, it’s important to schedule a maintenance appointment for your HVAC system so that your heating and cooling unit will be up and running all winter long.

If your system is 10 or more years old, now’s the time to schedule a tune-up with your HVAC service provider. They’ll be able to inspect and clean all of your heating and cooling components and discuss any changes that need to be made like: lowered airflow, for example for an oversized unit; repaired or replaced parts; and a thorough check of your system.

Preventing repairs is much more economical than calling a repairman during the middle of winter, and it will keep your system running as efficiently as possible throughout the coldest months. Plus, it’s always a good idea to be on the safe side and make sure that your HVAC system is ready for the colder weather.

Turn On Your Heat Pump or Furnace 2-3 Times Before Winter Arrives

Your HVAC system is only designed to work in one climate, but if you know that your climate is going to change considerably in the coming months, you can turn on your heat pump or furnace 2-3 times before winter arrives.

If you have an older system, consider letting the fan work while you are gone during the day so that your HVAC system can work while significantly reducing or even eliminating the humidity in your home. This will help to prevent frozen water lines and will reduce some of the strain on your system.

Adjust and Test Your Thermostat – And Think SMART

If you want to make sure that your home stays comfortable throughout the winter, you should adjust and test your thermostat. To make a good adjustment, make sure to read the instructions for how to do it well. One of the main things to think about when adjusting your thermostat is if you have a programmable one. Programmable thermostats can be set ahead of time or remotely from your computer or cell phone to help save on energy costs and keep your home at a comfortable temperature even when you’re not there.

Replace Your HVAC Air Filters

Airflow is another important factor when it comes to heating and cooling your home. Be sure there’s nothing blocking any air vents in your system, and that all of your registers are clean and open before you start up the heat. Don’t forget to check outdoor units for leaves, dirt and other debris.

If you haven’t changed your HVAC system’s air filter recently, now is the perfect time to replace it. A clogged or dirty filter can prevent proper airflow and damage components-so this is one task you definitely don’t want to put off! 

Getting a new high-performance filter will improve airflow, help to keep your system in good working order, and will help reduce energy bills. 

Winterize Your Outdoor AC Unit

If you have an outdoor HVAC unit, consider covering it with a winter cover when it’s not being used so that the elements can’t get in. This will prevent dirt, leaves, snow, and ice from building up around your unit, which could cause it to malfunction or breakdown.

Outdoor HVAC units are more likely to experience problems during the winter because they’re exposed to the elements-not only is it much colder outside, but there’s also snow, rain, ice, wind, and hail. So, protect your outdoor HVAC unit with weatherproof insulation hats-they’ll fit snugly over the top of your unit and will prevent snow, ice, etc. from accumulating on top.

Pipe insulation kits are another great investment that you can make to help protect your HVAC system during the winter months. By wrapping your outdoor pipes in these kits, you can prevent them from freezing and causing expensive repairs.

With a little bit of preparation, you can prepare your HVAC system for winter to ensure that it runs smoothly and efficiently when the colder weather hits-and you’ll also help extend its life!

Check For Drafts

Look along the kitchen, bathroom, and other exterior walls of your home for any openings around electrical outlets or switches. Also look at attic access points such as soffit vents and louvered roof vents that may not be fitted with winter covers before winter arrives. Insulate these areas and add weatherstripping where necessary.

Prepare The Pipes

If you aren’t currently using a drip leg or drain pan on your outdoor unit, put one in place before the first hard freeze hits to prevent damage from ice and water buildup. Check all of your indoor and outdoor faucets for drips, and seal leaks using an appropriate caulk such as silicone or polyurethane.

When you’re away during the day when cold weather hits, consider shutting off the water supply to all of your plumbing fixtures like sinks, toilets, tubs—and especially sprinkler systems. This will help prevent your pipes from freezing, which could result in broken pipes and leaks.

As the weather begins to cool down, be sure to keep your HVAC system in top shape so it can keep you nice and comfy all winter long!


It’s that time of year again when the days are getting shorter and colder-and it’s important to take preventative measures against HVAC issues. The tips we’ve provided in this article should help you prepare your system for winter so that it can work efficiently during the cold months ahead, saving you money on energy bills and preventing costly repairs. If these 7 quick tips seem daunting or if you want assistance with implementing them, give us a call at Air Pro Heating & Air Conditioning, we’re here to help!

Tips On How To Take Care Of Your HVAC System This Fall


Fall is the time of year when you’re most likely to need your heating and air conditioning system. And while this might not sound like a big deal, it can actually be quite an expensive problem if you don’t take care of it! To avoid that, there are a few things you should do.

Clean or Replace Filters

It’s important to change filters when needed. A dirty filter, also known as a clogged filter, can cause your heating and air conditioning system to work harder than it should, leaving you with higher energy bills and lower comfort levels. If you’re not sure whether your filter needs to be changed, here are a few signs to look for:

1) Visible dirt accumulation on the filters – The filter screens will eventually become clogged with dirt over time and need to be cleaned or replaced.

2) Unusually noisy operation – Dirty filters can make your heating and cooling system work much harder than required, which may result in the unit making unusual noises that weren’t typically there before.

3) The issue persists after replacing the filter – If you’ve replaced your filter recently and still notice problems, it’s possible that the filters are not actually dirty. It could also be a sign of mechanical failure or other problem instead.

Clean Around the Outdoor Unit

The outdoor unit should also be kept clean to avoid dirt from building up around the outdoor unit and clogging the filter. Blowing it off with a hose or vacuuming it will suffice. Dirt can accumulate quickly on the surface of the outdoor unit, which can cause mechanical failure if left unchecked.

Be sure to inspect your outdoor unit once a year to check for signs of rust or corrosion. If the unit is visibly corroded, it may be time for a replacement because those types of problems usually occur slowly over time and cannot be fixed easily.

Check your Fan Blades

If your fan blades appear dull and rusty, then you should also inspect the inside of the unit. This will typically require you to remove the front panel and clean it out and replace any parts that may need to be repaired or replaced. Dirty and rusted fan blades can accelerate this process.

Also check for any obstruction in the heat exchanger and remove if necessary, such as leaves or other debris. This will help to ensure that your system is running at peak performance and prevent abnormal sounds from occurring.

Check Coils and Drain Lines

Check for mechanical failure or other problems. Your air conditioning unit may not be clogged with dirt, but it could also have a mechanical issue instead. To diagnose the cause of the problem, you’ll want to inspect your coils and drain lines.

A dirty filter can result in an AC system that is working much harder than required, which is likely to produce abnormal sounds.

If your AC-unit appears to be making unusual noises, there may be something wrong with your coils or drain – which often happens when the condenser coil is dirty or iced up.

The condenser coil can accumulate dirt and dust over time, which will slow down the performance of the AC system and make it louder.

Schedule HVAC Maintenance

Making sure that your system is well maintained will help to ensure that it operates at peak efficiency, requiring less work from your system and reducing the risk of breakouts. You want to keep it clean, keep it maintained, and replace any parts/components as needed. This is what you do to take care of your HVAC system this fall. One way to do that is by having your system inspected by a hvac maintenance professional, which can help you avoid costly hvac repairs during the winter season.


This article has provided a few tips to help you take care of your HVAC system this fall. It is important that you have it inspected by an expert before the winter season, and if necessary, change the filter in your AC unit! If these tasks seem too intimidating for you or if they are outside of your expertise-do not fret. Our team is always ready to partner with our customers on their home improvement projects. We can provide quality workmanship while making sure that we keep up with any applicable safety regulations or codes set forth by local authorities. Let’s chat about what type of service would best suit your needs so we can get started on a plan today!

How to Prepare for Furnace Repair and Installation

technician repairing heater

Every year, people spend more than $6 billion on home heating. But despite the high cost of a quality furnace and installation, many homeowners are still experiencing problems with their heating systems. The most common reason for this is a dirty filter which can be easily remedied by hiring an HVAC technician to replace it. However, some other issues may also need to be addressed in order to ensure that your system is working properly!

For instance, if your furnace has been running too often or at the wrong temperature you might have a thermostat issue which needs repair. If your burner doesn’t ignite when called upon you might need new ignition parts or electrical work done by an electrician. All these things could indicate serious underlying issues with your system and should be addressed as soon as possible.

In order to understand what a qualified technician can do and how he or she can restore your system back to normal, you should first read the information below. Learn about the basic components of traditional furnaces, as well as some other knowledge that can help you make an informed decision!

Traditional furnaces have both electrical and gas components which usually operate together. The furnace has two major parts: a blower motor and an air filter located at the front of the unit near the bottom; and the burner assembly which is attached to a heating element. On top of these units are heat exchangers that provide warmth by releasing water vapor into your living space through vent tubes. Basically, this process involves heating up a gas with an electric coil and then forcing it through the heat exchangers to produce warm air.

If any of the above parts begin to malfunction, your whole system will be affected. For example, if you notice that your heating system is taking too long (or too short) to start and you hear constant banging noises from inside the unit, this could mean that either the thermostat or blower motor has become stuck in place. Also, if your furnace continues to run when it’s not supposed to—or abruptly shuts off when it should be running—this might indicate electrical problems which need repair by an electrician.

Furnace Repair and Installation

Furnace repair is the process of correcting problems with a furnace. A furnace may need repair or replacement due to various reasons. The first reason may be clogged filters, dirty blowers, damaged sensors, and faulty parts. Residential heating systems usually have an air-intake outside the home and use either gas or electric heat that heats up a series of metal pipes running through the house. Most furnaces have an automatic thermostat that controls the temperature inside the home by regulating how much gas or electricity goes into the system. In order to start working properly again, certain parts may need to be replaced or adjusted like boiler limit switches and pilot assemblies. An experienced technician can help diagnose what is wrong with your heating system before it becomes a huge problem.

The cost of furnace repair or replacement mainly depends on the type of furnace and its size. If you have a high-efficiency furnace, you should know that it will require more heating maintenance than the traditional one because it is more complex. Traditional furnaces are less expensive to maintain but they may be subject to issues like corrosion if not maintained regularly. On average, an annual maintenance costs $200 for a standard furnace and $350 for a high-efficiency model. To prevent major repairs, make sure that your heating system has scheduled tune-ups every spring and fall! Besides regular inspection, you can save up to 20% on energy consumption with a high efficiency model by keeping the filters clean at all times! If your heaters seem to be working slower than normal, make sure you schedule furnace repair and installation as soon as possible!

What to Expect from Furnace Repair and Installation

In the beginning of the heating season, furnace repair companies receive a lot of calls because people are concerned that their system isn’t working anymore. At this time of year it is important to make sure your heating system is ready and functioning properly. One common problem with furnace repair is a clogged filter which can be easily removed by an HVAC technician. A dirty filter can significantly reduce your air flow and you may not notice it until your house starts feeling chilly or drafty! In order to avoid paying for unnecessary work, check your filter at least once per month! If you have a scheduled heating tune-up in spring like most homeowners do, don’t forget about fall! Furnace repair companies will focus on cleaning out the entire system and making any necessary changes to the thermostat. Hiring a professional will ensure that your home is in good hands!

Common Furnace Issues

So how do you know what’s wrong? Here are some of the most common furnace issues experienced by homeowners which can help you determine if your furnace repair is in order:

Low Air Flow From Your HVAC System

This could mean that either your blower or motor has gone out.

HVAC System Blower Problems – If your blower is no longer blowing air through the vents into your home, it’s probably time to replace your furnace blower motor. HVAC motors tend to fail after a few years and are not that expensive to replace which means hiring an HVAC technician to replace it isn’t a very big cost. Before contacting your technician, however, check to make sure that the thermostat is set and the system is running properly.

HVAC System Motor Problem

If you have already replaced or reset your thermostat and everything is still not working properly then your motor might be bad. This could mean that there are clogs which need to be removed from the system, such as dust clogging up the system. When in doubt about what exactly needs fixing just call an HVAC technician for help!

Strange Smells From Your Furnace

There are several reasons why your furnace may stink:

  1. You Have a Dirty Filter- It’s amazing how much dust and debris can accumulate on air vents! Dirty filters clog up the system so that it cannot operate properly. Most people don’t realize how often they need to change their furnace filters until they experience this problem firsthand. Change your filter every month or more should you have pets, allergies, or any kind of sensitivity issues which cause you to cough frequently.
  2. Your Burner is Failing- Burning smells can also mean that the igniter is failing in your furnace. Igniters are responsible for producing an electrical charge which causes the burner to ignite coal or gas. If your igniter fails, there may be a serious problem with your burner assembly which will need professional repair as soon as possible!
  3. You Have a Leak- When you smell gas in your house, always make sure to shut off the pilot light and open all the windows to ventilate the room. Once this has been done, call an HVAC technician immediately!

The Burner is Not Igniting Properly

There are several reasons why your burner might not ignite:

  1. Your Pilot Light is Out- If your furnace starts but will not stay lit even after you turn it off and on again then this means that one of two things: You have an issue with the wiring which needs to be fixed or there is a clog blocking the path of air flow into the burner.
  2. Your Thermostat is Broken- For some reason when people install a thermostat they tend to be lax about ventilating the room. If your furnace is overheating and the blower is not running then it may simply be that there are too many items blocking airflow into the system. Always remember to keep large furniture or cabinets away from air vents so that you don’t accidentally block important air flow!

Your Furnace Is Overworked

You might notice strange behavior in your HVAC system if there is something wrong with how it’s being run:

  1. It Runs too Much- Have you noticed that since you changed your filter, your furnace runs more often than usual? This could mean that you need to change filters more frequently! Alternatively, it might be time to call a professional HVAC technician for an inspection to see if there is some other problem with your furnace such as worn out gaskets which are causing excess air flow into the system.
  2. It Runs When it Shouldn’t- Sometimes when a thermostat fails, this can trick the system into thinking that it needs to raise temperatures high enough for the furnace to turn on. Needless to say you will pay significantly more money in energy bills because of this! If you notice strange behavior like excessive cooling or heating, schedule an appointment with your HVAC technician right away! Once again simply installing new filters might be enough but don’t just jump in and start buying parts before calling someone who knows what they are doing!

It Makes Strange Noises

When you hear strange sounds coming from your furnace, here are some things to look for:

  1. You Hear Gurgling or Grinding in the Burner- If you have a furnace which uses gas then one of the most common problems is a clogged burner. The technician will clean out any debris and replace the igniter if necessary before testing it again. If this does not work then you may want to consider replacing the entire burner assembly.
  2. Your Furnace Makes Squealing or Clunking Sounds- Any time that there is rust building up in your system, your parts will wear out faster than they normally would so get them checked out as soon as possible!

Reasons to call HVAC Services

Since your furnace is responsible for heating and cooling the air in your entire home, you should take advantage of the professional HVAC services that are offered to keep it running smoothly. Here are a few reasons why:

It Will Save You Money

Broken parts will cause more wear on other parts which will cost you money out of pocket! Buying a new system may be cheaper than repairing one that’s already broken but if it fails soon after installation then you could end up spending even more than necessary. A properly maintained furnace will last much longer and save you lots of money in repairs down the road!

The System Will Work Better

The main purpose of having an HVAC technician service your furnace every year is to clean all the dust and debris that is blocking important air flow. Cleaned air will warm up faster and cool down more effectively during the summer so it’s very important to keep your filters changed on a regular basis!

It Can Save You Energy

If you have an HVAC technician take care of your furnace, he or she can make sure that your system runs as efficiently as possible which means lower energy bills! Furthermore, there are lots of ways to decrease how much energy your furnace needs in order to do its job: Use drapes instead of blinds because they will insulate against drafts. Keep furniture away from heat vents so that air flows freely into the room. Cover windows during cold months with storm windows or drapes.

It Improves Your Home’s Appearance

Lots of people invest in HVAC systems because they make their homes look nicer! The most common reason for this is insulation which keeps your home warmer in winter and cooler in summer to save you lots of energy dollars on utility bills over the long run. As soon as you notice that your furnace has a problem, schedule an appointment with a professional HVAC technician to get it checked out before further damage occurs!

By following these suggestions, you can prevent furnace repair and installation problems from occurring and instead enjoy having all the benefits of a properly installed heating system!

In order to prepare for furnace repair and installation in Fayetteville, you should have an inspection done by a professional. A technician will come out to your home or business and take a look at the heating system. They’ll be able to tell if there are any issues with it before starting work on repairing or installing a new one! This blog post has provided some terrific information about what you can expect when hiring someone for this service so make sure you’re well informed before making that decision yourself. We hope this article was helpful in preparing for furnaces repairs and installations as we know how stressful these things can be. Feel free to call or message the Air Pro team for any additional assistance!


How to Choose the Right Heating System for Your Home

technician fixing heater system

It’s important to know what kind of heating system your home or building uses, so you can get it serviced before it gets too late!   Here are three types of heating systems that a home can use: the solar, auxiliary, and central. The solar heating system is the type you would find in a greenhouse. These systems won’t work in every environment and are really only good for areas with warm climates where there is plenty of sunshine. Auxiliary heating systems consist of space heaters that work on electricity. These can be used to take the chill off a drafty room or to provide extra warmth when the temperature outside dips below freezing. Central heating systems are controlled by either gas, oil, or electricity. These are the most common, and a system like this will heat your entire home or building with little effort.

The most important thing to remember when it comes to heating systems is to make sure the one you choose works for your environment and can be repaired easily if it breaks down. Remember, it’s better to find out before winter starts what kind of heating system you have and whether or not the parts are being kept up to date so the machine can run efficiently!

What is a Heat Pump?

The Heat Pump is a machine that transfers heat from one place to another through refrigeration. The process of the heat pump relies on four basic principles: (1) Temperature differences cause air or water vapor to move; (2) Air and water vapor are moved by fans, blowers, or pumps; (3) Moisture condenses when it moves into cool areas with lower temperatures; and finally (4) When moisture evaporates in warmer areas with higher temperatures, it releases its latent heat of vaporization. This energy transfer is called “latent heating.”

A heat pump works by transferring this latent heat from a cooler area inside your home to a warmer area such as the radiator in your living room. It does this because it has the ability to do both things. First, it can remove heat from a cooler area and transfer it to a warmer location, or secondly, a Heat Pump can remove heat from an outside environment of lower temperature and transfer that heat into your home by warming up the inside! It all depends on how you design and use your Heat Pump.

Pumping stations are used for public water supply systems in large cities; however, these pumping stations are not considered to be “heat pumps” because they do not move energy from one place and dump it into another. Instead, they simply pump the water upwards against gravity. In this regard they function like simple hydraulic elevators. These devices include large-scale installations such as those at Niagara Falls as well as smaller neighborhood pumps.

Great engineering is required to allow for adequate heat transfer in either direction and provide a source of heat. Great care must also be taken with the design or the system to ensure that it operates within safe temperatures, pressures, and flow rates as they all have implications on how well your Heat Pump will operate. It’s important to get your Heat Pump serviced regularly so you can make sure everything is working properly!

Heat Pump Installation

In order to understand if your home has a heat pump installed, and which type you have, look for the outside unit where all of the pipes meet together coming into your house. If there are two different sets of pipes (usually 2 black rubber tubes), then it has two separate units – one for heating and one for cooling (the fan comes on when the compressor turns on). If there are 3 different sets of pipes (usually 1 black, 1 copper and 1 gray rubber tube), then it’s a combo unit that has everything!

Your heat pumps are an integral part of your heating system; however, they require maintenance to ensure their continued operation. It’s important to have regular checkups with a local technician so you can be sure that everything is working properly. You wouldn’t want to end up freezing in the middle of the winter because your Heat Pump broke down! Make sure you get your Heat Pump serviced regularly by someone who knows what they’re doing – not just any old HVAC guy! A qualified technician can help with heat pump installation & repair and will make sure all parts of your Heat Pump are working properly so you can continue to stay warm all winter long.

Transitioning from Heat Pump to Oil Heating

Heat Pump systems, unlike their oil-based counterparts have no combustion process that requires filter replacement. However, there are a few things that you will need to keep in mind when transitioning from a Heat Pump system to an oil-based heating system:

If your home is equipped with a forced air furnace (most homes are), it will need to be replaced by a boiler and radiators. It’s important for the technician who installs your new boiler/radiator combination to know how your old heat pump was configured (i.e. which pipes went where) so they can ensure proper operation of the new equipment! When it comes time to clean out or replace your filters, make sure you clean the condenser coils on your heat pump and make sure to replace them as well!

If you are interested in switching from a heat pump system to an oil-fired system, it is important that someone comes out and assesses your home before any work is carried out. They will measure your home for the size of radiators, calculate what temperature you need them to be set at based on outside temperatures, determine which type of boiler system would be best suited for your particular requirements (baseboard or tankless), see where the pipes go inside of your house, etc.

Every situation is unique; therefore it’s important that a professional come out and assess everything prior to installation so they can provide you with comprehensive advice. It’s to your advantage to have a professional come out and assess your home – it will save you money in the long run!

How to Choose the Right Heating System for Your Home

There are several different ways to choose the right kind of heating system for your home, so we’ll go over a few things you should keep in mind when choosing what’s best for you. If you have a vent-free or direct vent gas fireplace, it is actually a good alternative to using natural gas heat because all you need to do is light up the fire and let the flue draw heat from it, warming up your entire room at once. Of course, this won’t be as effective if there isn’t enough oxygen flow into the venting system or if they aren’t installed properly. A direct vent system only works if the chimney is connected outside and it’s big enough to allow for a smooth air flow. 

You can also use a gas-powered heat pump, which will have an auxiliary unit that draws in cool air from outside, heats it up with a heating element, and then circulates warm air back into your home. If you choose this particular setup, just make sure there is enough ventilation inside so that the room doesn’t get stuffy or smelly. Even with a proper ventilation system in place, make sure there isn’t too much moisture from condensation — as it could be dangerous for your family members!  

There are also high capacity systems like forced air units that run on natural gas or propane. They tend to be much more powerful and they also can be split into zones, so you can have different temperatures in different parts of your home. If you’re looking for a higher end option, it’s ideal to install radiators that circulate hot water through them. These are the most effective systems because there’s no need for air ducts or electrical connections since these devices work simply by pushing hot water through pipes.  

There are also radiant flooring systems that warm up objects around them using special heating coils on the surface. This heating method is a lot safer than forced air systems because there aren’t many moving parts (except for fans) and they don’t move dust or allergens from one place to another like other types of heating elements. Since there are no air ducts or fans, these kinds of systems can save you a lot of money since they only use energy to keep the heating elements on and flowing. 

When choosing a system for your house or office, it’s ideal to go with the highest capacity unit that fits with your budget. It may be better to choose two smaller units than one big one that doesn’t provide enough heat. When checking out different types of heating devices at your local hardware store, remember — each device should have its own thermostat so you can start it up when you need it and turn it off again once the temperature inside has been achieved. Another thing to keep in mind is ventilation; make sure all zones are vented outside through a single pipe. 

When to Get Your Heating System Serviced

It’s very important to understand when you should get your heating system serviced. Ideally, it should be taken care of about once a year, but that could depend on the age of the system and what type of heating system you have in your home or office.  It’s also important to make sure you’re not wasting your money by spending too much on heating elements that are already working fine. 

If you aren’t sure what kind of heating system you should get, it’s ideal to speak with a professional who can do an inspection and discuss some options for you. A lot of times they’ll give recommendations for better ways to heat your home or office that will be more cost-effective than using old systems that might not work properly. The most important thing is making sure that whatever system you choose is installed properly so there are no issues down the road!

When it comes to choosing the right heating system for your home, there are a few factors you should consider. According to Home Advisor, these include: how much heat is needed in various rooms of your house; whether or not you want central air conditioning and if so what size equipment will be required; and whether or not you have pets that shed hair which can clog up vents. When figuring out where you need to install one, make sure they’re placed on exterior walls with no overhangs above them (to keep rain from seeping inside) as well as near exit doors but away from any windows or other openings. If all this sounds confusing then just give us a call! We’ll walk through each step together until we find an option!

The Ultimate Guide to Calling an HVAC Company

the ultimate guide to calling an hvac company

If it’s been a while since you’ve had your furnace or other heating equipment serviced, then now is the perfect time to call an HVAC company.

This article will outline what qualifications you ought to be looking for as well as the best times of year to get your furnace or other heating equipment serviced.

How do you know when it’s time? Well, if a technician comes over and checks your system and finds that there are any issues with either its safety or efficiency, then they’ll have no problem telling you how long until we need to come back out again. And even before problems arise, there are some tell-tale signs: like increased energy consumption during peak hours (7 AM – 9 AM / 6 PM – 9 PM) or noticeable changes in indoor temperatures.

As an HVAC company, we’ve seen many basic furnaces that are still running on the same system since they were installed back in the early sixties! So if your furnace hasn’t been serviced in 25 years, it’s a pretty good sign that it’s probably due for a check-up, even if you’ve been using it regularly.

When hiring an HVAC company to service your furnace or other heating equipment, there are some very important things you should be looking for.


What qualifications should you look for when hiring an HVAC Company

When you are looking for the right contractor to help you in your home or office with installation or repairs, there are a few things that make up a good HVAC company . First and foremost, any reputable company should have all of the proper licenses an permits. Finding a company who can prove they are licensed will give you peace of mind.

Second, you should always confirm that HVAC systems used are up to current codes and standards. This is one of the most important things you should look for when hiring an HVAC company . If they cannot prove their work is up to code, this shows negligence on the part of the contractor. A good company will have no problem giving you proof of all licenses and permits. You can look for any certifications they may have as well as any articles or news in publications about them. It’s always a good idea to ensure there are references available so that you can talk to someone who has worked with them previously. This too is something they should be able to provide without question.

If you are looking to have an HVAC unit installed in your home, make sure that the company you choose can confirm they have experience working with any contractor who installs the brand of heating and air conditioning system or device you are wanting. A good company will always be more than willing to show proof of previous work and installations as well as any training or certification for the systems they install.

Are there any times when it makes sense to get repairs done?

There are a few different factors that go into deciding whether or not now is the right time to replace your old air conditioner . First, pay attention to how often a certain part of your unit has failed in the past. If it’s been happening consistently over several months, then you might want to consider getting a new unit. If you just had it installed and something breaks, then the air conditioning company will handle the repairs for you. You can also look at your bill to help decide whether or not now is a good time to have work done on your old heating system . In some situations, simply upgrading to a newer and more efficient furnace can save you money on energy bills.

Another option that many people overlook is replacing their air filters regularly. This is very important since dirty air filters keep your system from working properly. Keeping your air conditioner’s filter changed out every few weeks goes along way toward improving efficiency as well as keeping costs down overall.

You should always plan ahead when looking at these issues and make sure you know exactly where you stand when it comes to costs and repairs.


The best times of year to get your furnace or other heating equipment serviced

Hire an HVAC Company during the fall. During these months, you’ll have the opportunity to get a furnace tune-up and have your heating system serviced. This will ensure that nothing goes wrong during winter, when it’s most likely for your heating system to break down. Additionally, because you’re dealing with an HVAC Company during the fall, you’ll most likely find yourself paying less for their services. Why? Well, for one thing, most HVAC Companies tend to lower prices during this time because their business is at a low. In addition, technicians who would’ve otherwise been on vacation are more likely to have returned to work if you hire them in the fall.

If you are looking for an HVAC Company to service your air conditioning or heating system, then avoid hiring a contractor during the summer months. This tends to be the busiest time of year for these contractors and they’ll charge more per hour than they otherwise would have since their services are in high demand. These companies will also have fewer technicians available and therefore expect longer wait times.

Finally, in terms of choosing the best times to get work done on heating systems , spring is another good option. You can usually hire an HVAC Company at this time without having to deal with increased prices due to its popularity among other businesses. Just make sure you give yourself enough time between installation and when you need it ready by if possible so that any problems can be corrected.

Now that you know some of the best times to get your air conditioner repaired or furnace serviced, consider learning more about how these heating and cooling systems work so you have a better idea of what needs repairing. Understanding what parts are important and why they need attention will help you maintain your system for many years to come.


How do you know if it’s time to call an HVAC company

You may be wondering when to hire an HVAC Company and not just rely on your furnace. Here are some of the things that can tell you it’s time to get an expert opinion about your heating or cooling system:

If you notice that your air conditioner is no longer cooling your home as well as it used to, then it might be time to call someone for repairs. If this occurs during summertime, then try clearing out debris from your outdoor unit so you can check if this solves the problem first. If it fails the test, then make a note of specific times when coolness has been lacking before contacting service providers. The more clues they have, the sooner they’ll pinpoint the issue. Another thing worth checking during summer is your air conditioner’s filter. It may just need to be cleaned or replaced, which can make a significant difference in how it works.

If things begin feeling cold when you adjust it up rather than down, then this most likely means that you have an issue with your thermostat . Since these work by sending signals to the furnace or air conditioner based on your temperature settings, they need to be working properly for your system to operate as intended. That’s why you should call and schedule service if you notice issues with yours. When dealing with anything related to heating and cooling systems , remember that waiting until fall or winter can mean higher costs due to increased demand from other homeowners who’ve had similar problems during these seasons.

Because cool air is heavier than warm air, it will sink to the lowest level of whatever space it’s in. This means that if your home has low vents, then cool air will be trapped there downstairs and won’t rise back up to where you need it upstairs near the bedrooms. That’s why ductwork should be installed correctly at all times. It may seem like a minor thing now, but if you continue having issues with cooling throughout your house, then not getting rid of those pockets of stagnant air could end up costing you more money later on for repairs or equipment replacement due to malfunctions brought on by this problem.

If you’re noticing that your system seems louder in summertime and quieter during winter months when compared to how it sounded before, then this could be a sign that you need to call an HVAC expert. The reason for this is that air conditioners are designed to start running less frequently when the weather cools down, which means there won’t be as much load on them. This makes it easier for them to cycle air more quickly and quietly during these times of year. Therefore, the sound you have been noticing probably comes from something else causing your system to run more often or louder than before. It’s best to get repairs done right away since not addressing issues with parts like condensers can lead to bigger problems down the road in terms of replacement costs and other expenses associated with malfunctions caused by damage or defects

If you notice things such as ice build up on your outdoor air conditioning unit, then it’s a sign that something isn’t right. Most likely the issue is with ambient temperature and humidity levels in your area. That’s why you should keep an eye on the outside components of your HVAC system more carefully if you live in areas where temperatures drop below freezing during winter months or soar above 80 degrees Fahrenheit during summertime. It may be as simple a matter as adjusting things like heaters to make sure they’re blowing hot enough or having an expert check for issues brought on by moisture caused by ice build up. Also ensure that any filters are cleaned or replaced immediately since these can cause efficiency issues which affect airflow

It really pays to do some research when hiring an HVAC professional , especially if this will be your first time. The more you know about what to look for, the better equipped you’ll be to get the best service available at a price that is right for your budget. We’re here to help you with that in today’s post!

Using an HVAC services directory, search online or ask friends and neighbors for recommendations can give you valuable insight into which businesses are most likely to help you out and provide value for your money, versus those who might not be as reliable. One thing worth checking during summer is your air conditioner’s filter . Not only does this simplify replacement of filters every few months (since they can hold quite a bit of dirt before needing changed), but it also means that air can more easily flow through the system, which saves you money and reduces wear on your HVAC equipment.

Once you’ve determined what kind of services you need, be sure to call several businesses for quotes before making a final decision. Most professionals will offer free in-home estimates upon request , so be sure to ask about this as well. You can use this opportunity to learn more about their business and compare options regarding costs.

Beyond that, check reviews from the BBB (Better Business Bureau) or online forums for any warning signs if there are any red flags present with other customers who have used these companies in the past. Always make sure that any requirements, such as licenses and permits are valid since not having those things could mean problems later on down the road, especially if you have to make a claim for service. Don’t be afraid to ask plenty of questions either; this is your home and you should feel comfortable with those who work on it!


Different services offered by HVAC Companies

HVAC companies offer a variety of different services. They can help you with your residential or commercial HVAC system. Some of these services include:

-Servicing -Installation -Maintenance -Repairs

-Cleaning and replacement

-Brand changeover or installation

-24 hour emergency service

-Professional advice

-Service agreements

-Free in-home estimates

For more information regarding services offered by companies, it would be best to check out their website or call them.

If a replacement is necessary, there are many things you need to know about choosing and installing the right HVAC systems. Before getting started, you will want to take measurements of any windows in your home as well as doors. These will determine the size of the unit that you need to install.

HVAC companies give free quotes on installation so don’t hesitate and ask for one! It’s important that when you get an estimate that you understand exactly what they are talking about since some businesses may charge differently based on work needed.


Signs that indicate it’s time for a check-up on your furnace or other heating equipment

One sign that it’s time to check up on your furnace or other heating system is an increase in noise. If you’ve noticed a change in the volume of the heating system when it turns on, this could mean one of two things: either the unit needs a tune-up, or something else around your home has shifted. For example, when floors settle and shift because of natural occurrences such as tree roots growing into them from below, they can cause the heat ducts to be pressed against a wall or floorboard more firmly than before. This means that more air will flow through that part of your system which makes it louder when it cycles on.

Depending on what you checked for above and whether you still feel like something is wrong, your next steps might include calling a professional to perform an inspection. One reason you might hear excess noise from your heating system after it turns on is higher than normal vibration levels being emitted by the unit as it runs. If this is the case, then it’s most likely due to a lack of lubrication in one or more moving parts and that could lead to problems down the road if not addressed. Another sign worth paying attention to involves temperature fluctuations in different rooms using your HVAC system . You may notice that one area of your home feels very warm while another seems cooler than usual; this could be caused by airflow issues such as a dirty filter or clogged vents.

If these simple checks don’t identify any issue with your heating system or HVAC equipment, then the next step to take is to call an HVAC technician. This person will be able to perform a more comprehensive examination that should help them identify any problems and get your system working again in no time!


The importance of proper air conditioner repair and installation during the warm summer months

During the warm summer months, it is just as important to get your air conditioner repaired and installed as it’s getting into shape for the cooler months. There are some simple things you can do to ensure that your AC unit is in top working order.

The first thing to check is that you have a clean filter in the unit. You should be changing it every few months anyway just to keep it from clogging up and running poorly, but if you’re noticing a change in how loud your unit runs, this could also mean that your filter needs changing. So call up a professional at this point and have them check out your AC system for any other problems to see if that’s what might be causing it to run louder or differently than usual.

Another thing you can do to reduce the load on your system when it’s running is to keep your blinds and curtains closed in order to prevent sunlight from entering the home through windows. This will also make sure that you aren’t wasting money paying for cooling temperatures inside that aren’t necessary during times of nice weather outside.

Another issue with air conditioners showing signs of wear and tear involves having no power at all or cutting out frequently throughout a given day even if there are no other problems present that might contribute to this issue, such as a dirty filter, clogged vent or bad wiring issues. If AC repairs have been attempted before but haven’t fully solved the problem, then it may be time for an entirely new installation.

If any of these issues sound like they might be causing problems with your air conditioner, then you may need to call a skilled HVAC technician who will be able to assess the situation and make recommendations on how to proceed. They may also be able to provide you with some cost estimates on air conditioner repairs or installation based on what they find in the course of their inspection.

What kinds of problems should I look for?

So what sorts of things could cause your AC system to run louder than usual? If excess vibration is being emitted from a part that moves within the unit, then this could mean there’s no lubricant holding it together and that means time for an HVAC technician to repair or replace the part entirely. Something like a dirty filter might affect how well air flows through your cooling equipment, which causes it to work harder and create more noise than normal. Clogged vents can cause hot or cool air to go where it isn’t supposed to instead of where it is, which also makes the unit’s job harder. Any time your air conditioning system or heat pump fails to work correctly or stops working at all and there aren’t any visible problems with wiring or a dirty filter, then this indicates an underlying equipment failure that will need to be addressed by professional repair services.

The best times for AC repair and installation are after the first two weeks of April until just prior to Memorial Day weekend each year because these are when cooling systems see the highest levels of usage over a long period of time. HVAC professionals can help you reduce your energy bills while avoiding the hot summer months altogether!

You won’t know if you need repairs or a new installation unless you have your unit inspected so give us a call and we’ll be happy to come take a look at your AC system as soon as possible. It’s important that you maintain working air conditioning during all times of the year!


Tips on what to ask the technician before they leave and how often they come back out again

We recommend that before the technician leaves for the day they provide you with a price estimate for any repairs that need to be done, and if possible, they should also offer you an idea of how long it will take. Doing this enables you to decide whether or not your budget allows for them to do the work then and there or if you’ll be coming back at some point in the future to have them complete their work. If you’re not satisfied with the price or how long it will take to fix the problem, then you can ask for an alternative plan and wait until you’re ready to have it done.

When it comes to when they’ll return, we suggest scheduling your AC repair services during times when they aren’t normally busy so that you don’t have to wait around all day if you don’t want to. This is also a good way of determining whether or not they are reliable enough for your needs, which could be important if you foresee having them out multiple times within one year.

Due to the unique nature of each job as well as various appointments scheduled beforehand by other customers, there’s no guarantee of how long it will take for repairs or installations to take place. As such, we recommend asking your technician for their opinion about how long they think the work will take so you can start planning around their schedule.

What are some questions I should ask them?

If you’re going to be spending money on AC repair or installation services, then you’ll probably want to know a little bit more about the technicians that will be coming out to do the work and why they’re qualified to perform these tasks. They should have answers ready for your questions in advance so that they don’t waste time answering things that aren’t important right away when it’s supposed to be costing you more if they run over budget. Here are some of the best questions to ask an HVAC technician before hiring: What is the warranty on parts and labor? You should never have to pay for another part again if one breaks. However, you will probably need new filters every so often that they shouldn’t charge you for.

How do you handle other emergencies such as power outages or frozen lines? If they’re not properly trained to deal with these types of problems then it’s not a good idea having them work on your heating/cooling system at all.

What happens if I want to go solar? Do you help me get started with this process or are there other companies that specialize in this type of service? Some technicians won’t be able to handle specific projects like these and others may recommend someone else. It’s better knowing beforehand before making any decisions.

How often should I get seasonal AC inspections? Most technicians recommend getting one done by the beginning of spring. This is when cooling systems see the highest levels of usage over a long period of time. HVAC professionals can help you reduce your energy bills while avoiding the hot summer months altogether! However, some people prefer to wait until late fall or winter before calling for an inspection so that they don’t have to worry about fixing any problems right away.

What hours do you work? It’s best if someone can come out and inspect your system at your convenience as opposed to having them show up at a predetermined time that may be inconvenient for you due to other plans. Of course, emergencies are different and more important than anything else, but it’s a good idea to let them know you’re willing to work around their schedule.


Benefits of having your furnace or ac unit serviced by an HVAC Company at least once per year, even if you’ve been using it regularly all this time!

If you’ve been using your heating or cooling system as normal without any problems then there’s probably no need to have it serviced. However, there are benefits to having this done even if it seems like you don’t have anything wrong with it at all. Servicing your HVAC system is important for a number of reasons!

The HVAC technician will be able to inspect the outside unit itself and check for any small issues before they become more serious and cause you a lot more problems in the future. The technician can also give you advice on how often you should change your filters or do other regular maintenance to keep the system running efficiently. The technician also knows the most reliable brands available in your area so they can help guide you on making the best decision for your needs.

Experts recommend changing your AC filter periodically to reduce how often you need to get repairs done on this component of the system. If the filter is dirty, they may also recommend cleaning it with a vacuum in case there’s debris like dirt or sand stuck between two pieces of the material. They can show you how to do this before they leave as well! However, if you’re having any issues with this part of an HVAC unit then always contact a professional technician right away who will be able to diagnose and fix it properly so that it won’t cause more problems down the road.

If you haven’t had your HVAC system serviced in a while then it’s also possible that there is some debris or other particles blocking the air flow. The technician will be able to check this out as well so that there aren’t any issues with this essential part of the system.

Lastly, an HVAC technician can do a regular inspection of the rest of the system like the ducts within your home and make sure everything is running properly. If they discover a problem later on, it will have to get fixed sooner than if left untreated right away! Remember that even though you may not be experiencing problems now doesn’t mean there won’t be any further down the line. So before you know it, you could be dealing with much more serious problems if you wait too long to get it serviced.

No one likes making a decision like this blindly. If you’re not sure if getting an HVAC inspection done regularly is worth the money then there are some things to consider before making your final decision. For example, think about how many times throughout the year you turn on the heat or air conditioning unit and operate it for multiple hours each time. Then do the math based on how long you’ve had your system installed already! This will give you some good insight as to whether or not servicing it at least once annually is worth all of the hard cash spent in the past.

Using a recordable thermostat may be able to prove useful when having HVAC technicians work on your unit. Recording the temperature before they arrive and after they leave can help them diagnose any problems that were caused during the service and may not have been realized at first. It’s a good idea to keep records of all future tests done as well so that you will remember what temperatures the technician had set it to in order to determine exactly what needs adjusted or fixed for next year when he performs maintenance again.


The benefits of having a regular maintenance plan with the HVAC Company that services your heating and cooling equipment!

It’s important to keep your heating and cooling system properly maintained. Not doing so can cause major issues for you in the future.

Servicing your HVAC system is important for a number of reasons! The HVAC technician will be able to inspect the outside unit itself and check for any small issues before they become more serious and cause you a lot more problems in the future. The technician can also give you advice on how often you should change your filters or do other regular maintenance to keep the system running efficiently. The technician also knows the most reliable brands available in your area so they can help guide you to the best one for your home! Lastly, they can also check to make sure any additional components are working properly as well.

The technician will be able to help you get the most out of your system by making small adjustments that may not seem like a big deal now, but could be preventing you from getting optimal heating and cooling throughout your home. Any time the HVAC is operating continuously for multiple hours it’s using a lot more energy than if it was just left alone or was used only briefly in the past. That’s why regularly getting it inspected can save you money on utility bills every month or year depending on when you have services performed!

Regular maintenance can also ensure that everything will continue working properly over time so that you don’t have to worry about anything breaking unexpectedly. This will also get your warranty extended or restore it back to the original length of time if you’ve already run out of it.

The technicians that perform regular maintenance checks can also be a great resource for helping you find ways to make your system more environmentally friendly and energy efficient . That way, you won’t feel guilty about how much money you are spending on utility bills every month! The last thing they’ll do is thoroughly clean off any debris around all areas of your HVAC unit both inside and out (you’d be amazed at what can get accumulated around there!) so ensure everything runs smoothly for years to come.

It’s hard to remember that having an annual service done on the heating and cooling system is important because it’s not something that you do on a daily basis. Sometimes we tend to take things for granted, which can cause routine maintenance to get overlooked. It’s normal to feel like your unit has been running just fine lately so there isn’t any compelling reason to have it serviced quite yet! However, if you want the most out of your heating and cooling system, then having regular maintenance performed will ensure that this happens.

It may be tempting to try and save some money by doing everything yourself. You might even feel confident enough in your abilities or think that only simple fixes are involved with the heating and cooling system in question. If anything is wrong at all however, there’s no guarantee that you’ll know how to get the heating and cooling system running again. Doing everything yourself can also be a safety issue if you don’t know what you’re doing!

If you call an HVAC Company, they will bring with them all of the necessary tools to ensure that your heating or cooling unit is working properly. They may also offer suggestions for additional steps that could save energy so it doesn’t cost as much every month in utility bills. That way, everyone in the house will be able to stay nice and comfortable no matter how hot or cold it gets outside!

Debris around your home’s air conditioner is one of the main culprits for making its efficiency go down drastically! The technician at the HVAC Company should do their best to make sure that your unit is as clean as it can be. This will prevent excess air from getting in, which will help make it more energy efficient. If the technician notices that something else is wrong while they are performing their routine maintenance check, then they should let you know immediately so it can be fixed right away!

If you want to avoid having to spend tons of money every month on energy bills, then now’s the time to get a reliable HVAC Company out to your home . You won’t regret this decision when you start seeing savings roll in!


The schedule and availability of an HVAC Company making sure they can get to you in time

It’s important to be aware of the availability of an HVAC Company that you want to hire. If you’re looking for a company that is available during holidays or weekends, then you’ll need to look into the hours they are open and what their availability looks like with regards to such days. You can also call the HVAC Company and ask them about their availability so that they don’t give you any false information. This way, it’s all on the table before anything else takes place.

Get the phone number of the HVAC Company you’re interested in hiring before they leave. This way, if you forgot to get any specific details or information from the contractor, then you’ll simply be able to give them a ring and tell them what additional questions or concerns you still have.

You should get two bids [should be worded as “informal bids”] for your new furnace or air conditioner installation. It’s important to get at least two bids from different companies when looking into a new air conditioning system. You will want to make sure that each bid is compared side-by-side with each other so that you can make the most informed decision regarding who to hire.

Most HVAC Companies will do more than just installation and repair work for furnaces, air conditioners, heat pumps and ductwork. You may be able to find out about these extra services when getting a bid from an HVAC Company, but it’s always good to ask the contractor if they offer any additional services like replacement air filters or furnace/air conditioner maintenance. The more information you have as a homeowner before you start looking into different companies in your area, the better prepared you’ll be when it comes time to making a decision.

The benefits of hiring an HVAC Company are plentiful. They can help you make the most informed decision based on your needs and they offer a wide range of services including installation, repair work, and replacement air filters or furnace/air conditioner maintenance. With so many qualified contractors to choose from in your area, it’s never been easier to find one that is right for you! Contact us today if you’re interested in learning more about how we can help and get a free estimate!

Furnace Tune-Ups: What’s Included & How Often Should You Do It

Furnace Tune-Ups: What's Included & How Often Should You Do It

Almost everyone is aware that your vehicle needs regular tune ups to keep it in prime condition and extend the life of your automobile. What a lot of people don’t know is that your home furnace needs regular tune ups also.

How often should I have my furnace tuned up?

Home furnace tune ups should be done regularly. It is recommended that you tune up your furnace once a year. This is to make sure the furnace is running smoothly and at maximum efficiency. Tune ups are also done as a preventative measure, to prevent any major issues down the line.


As the saying goes, “safety first”. The number one reason to get regular, yearly furnace tune ups is for your safety. Your furnace is a potentially dangerous appliance, considering that it runs by burning fuel. Regular maintenance such as yearly tune ups can prevent potentially life threatening malfunctions.


Yearly tune ups help keep your furnace running smoothly and at maximum efficiency. The smoother your furnace is working, the better control you have over the temperature of your home. A more efficient furnace also saves you money in the long run.


Just like with your vehicle, regular maintenance can help avoid needing repairs in the future. The better care you take of your furnace, the better shape it will be in to keep it running. After all, no one wants to have to wait for a repairman to come out and fix their furnace in the dead of winter, and then have to pay the fees for doing so. You can avoid a lot of problems by keeping up with regular maintenance, and yearly tune ups are your number one weapon against needing future repairs.

Cost of Tune-ups

Yearly tune ups, as part of your regular furnace maintenance, can save you money in a few different ways.

First of all, as already discussed, you are less likely to have to pay for costly repairs when you are vigilant about proper maintenance like tune ups. Not having to pay a repairman to come out and fix a broken furnace certainly keeps money in your pocket.

Second, yearly tune ups keep your furnace working in prime condition. When your furnace is working more efficiently, not only is the temperature of your home better regulated, but you are saving money on the cost of heating your home. A smooth and efficiently running furnace puts money in your pocket by saving money on energy costs.

Lastly, yearly tune ups save you money by preventing any voids on your manufacturer’s warranty. Most warranties require that you keep up with regularly schedule maintenance such as tune ups, if you do not abide by these terms, your warranty could be void. Then if anything ever happens to your furnace, even if the malfunction isn’t due to improper maintenance, you will be responsible for the costs of a new furnace rather than the warranty paying to replace the furnace.

Most of all, yearly tune ups save you piece of mind. To avoid accidents, repairs, and to keep your furnace running efficiently, make sure you are getting your regularly scheduled tune ups and if you need help, don’t hesitate to call the Air Pro team!


Repairing The Heating System In Your Home

Repairing The Heating System In Your Home

When winter is around the corner it’s a good time to think about your heating system. You want to stay comfortable in your home all winter long. It’s best to stay on top of repairs so that your system keeps working. If you wait around until it completely breaks it will cost more money to fix it than if you call in a professional sooner.

During a New Install

If you are considering a brand new heating system please consider having a professional install it. While most heating systems provide directions, the only way you can really be sure that it’s installed properly is if a trained professional does it. Plus, you have the added assurance that if something does go wrong due to installation they will fix it without further charge.

When Something Different Happens

Your heating system can seem to be working but have times where it’s just acting differently. Any irregularities going on means that you should call your heating system repair professional. Catching problems sooner, rather than later is an important component of keeping your heating system working optimally.

Unexplained Bill Increases

If you suddenly get a huge bill for no reason it’s time to call your heating system repair professional. There are issues that can pop up with a heating system that makes it work poorly or incorrectly that can cause spikes in your heating bill. Having a professional come check it out will probably get your bills back to normal.

Decline in Performance

If you start noticing some rooms are colder than they used to be, while some are hotter than they used to be, or other declines in performance of your heating system — it’s time to call in a professional. A professional knows how to test your system to find out why some rooms are unequally heated and why any other decline in performance might happen.

Strange Sounds

If you hear strange sounds when your heating system cycles on and off, where you did not hear them when it was new, then there is a problem. Most modern heating systems should be pretty quiet and should not “clunk” on and off. Your heating system professional will know the common causes of this problem and be able to repair it.

Only an experienced heating system repair professional will be able to determine whether the air is flowing well, or there is some other problem such as heating coals, or issues with your gas lines. When any situation happens with your heating system it’s important to call a professional sooner rather than later because nipping problems in the bud earlier will always save you substantial amounts of money over waiting until an issue grows worse or completely breaks your heating system. Give us a call at Air Pro Heating & Air Conditioning to schedule an estimate!